D-Link's DES-1005D is a powerful 5 port 10/100Mbps desktop switch that is an ideal choice for small workgroups.\n\nThe DES-1005D allows users to simply plug any port to either a 10Mbps Ethernet or 100Mbps Fast Ethernet network for compatibility, convenience, and faster connection. The switch comes in a small compact size designed for easy installation and high performance. The DES-1005D eliminates unnecessary traffic and relieves data congestion by delivering dedicated bandwidth for each of the five ports.\n\nEach port on the DES-1005D supports automatic MDI/MDIX detection providing true 'plug and play' capability without the need for confusing crossover cables or crossover ports. With the media auto-sensing feature, plug in the network cable to the DES-1005D directly without the need to worry if the end node is a NIC (Network Interface Card) or switch/hub. The DES-1005D also supports flow control and auto-negotiation of half or full duplex transfer modes for each port.\n\nThe DES-1005D provides dynamic memory allocation for data flow control to guarantee against possible packet loss. The DSS-5+ uses fast store-and-forward switching to ensure low data latency and prevents error packages from transmitting among segments.\n\nAuto-sensing 10/100 ports\nThe DES-1005D uses auto-sensing 10/100 Mbps ports, allowing a small workgroup to flexibly connect to Ethernet and Fast Ethernet devices to create an integrated network. These ports detect the network speed and auto-negotiate between 10BASE-T and 100BASE-TX, as well as between full and half-duplex, allowing you to get the maximum speed possible for each device connected to your network.\n\nAuto MDI/MDIX CrossOver\nAll ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables.\n\nFlow Control for Secure Transmission\n802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full. This gives you a more reliable connection for all of your connected devices.
Specifications courtesy of Icecat.biz | |
10G support | No |
Auto MDI/MDI-X | Yes |
Basic switching RJ-45 Ethernet ports quantity | 5 |
Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
Cables included | AC |
Certification | RoHS, FCC, CE |
Colour of product | Black |
Copper ethernet cabling technology | 100Base-TX, 10Base-T |
DC-in jack | Yes |
Depth | 8.34 cm |
Flow control support | Yes |
Full duplex | Yes |
Heat dissipation | 8.528 BTU/h |
Height | 2.91 cm |
LED indicators | LAN, Power |
MAC address table | 2000 entries |
Manual | Yes |
Maximum data transfer rate | 0.2 Gbit/s |
Networking standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
Operating relative humidity (H-H) | 10 - 90% |
Operating temperature (T-T) | 0 - 50 °C |
Packet buffer memory | 0.046875 MB |
Packet transfer speed | 14880 - 148800 p/s |
Power LED | Yes |
Power consumption (typical) | 2.5 W |
Power over Ethernet (PoE) | No |
Rack mounting | No |
Stackable | No |
Storage relative humidity (H-H) | 5 - 90% |
Storage temperature (T-T) | -10 - 70 °C |
Store-and-forward | Yes |
Supported data transfer rates | 10/20/100/200 Mb/s |
Switch type | Unmanaged |
Switching capacity | 1 Gbit/s |
User guide | Yes |
Width | 12.5 cm |